Defi Link VSD Concept User Manual download pdf (Page 9)

Number of cylinders setting

Press ENTER button when the following figure is displayed. Use

SELECT/BAR SELECT button to select

the number of cylinders, then press ENTER button to set the selection.

③Setting of Number of Cylinders

３４５６８

Warm-Up setting

Press ENTER button when the following figure is displayed. Use

SELECT/BAR SELECT button to select

water temperature, oil temperature, or OFF. Then press ENTER button to set the selection. Use

SELECT/BAR SELECT button to set the desired temperature. If SELECT/BAR SELECT button is pressed

and held, the number is fast-forwarded.

W.TEMP OIL T. OFF

Special display setting

If ON is selected, the engine speed is displayed in digital when speed is 0km/h or 0MPH for more than 10

seconds. Press ENTER button when the following figure is displayed. Use SELECT/BAR SELECT button

to select ON or OFF.

⑤Setting of Special Display

ON OFF

Pulse free setting Hold Speed pulse setting

■When the Defi-Link Display VSD CONCEPT is used WITHOUT a connection to the Defi-Link System

■When the Defi-Link Display VSD CONCEPT is used WITH a connection to the Defi-Link System

NOTE: If "MPH, °F, PSI" is selected in the

setting of units, data other than

the engine speed is not displayed.

NOTE: If "MPH, °F, PSI" is selected in the

setting of units, data other than

the engine speed is not displayed.

NOTE: When connected to the Defi-Link System, the PEAK button of the D.C.Unit is unavailable.

I)If the auto warning mode is turned ON in the setting of auto warning

NOTE: Even if REC button is pressed in vehicle's stopped condition, the vehicle speed data cannot be

recorded and Rec Mode will turn to Play Mode.

II)If the auto warning mode is turned OFF in the setting of auto warning

④Setting of Warm-Up

Range of setting

Water temp： 21℃∼120℃(69°F∼248°F)

Oil temp： 51℃∼150℃(123°F∼302°F)

NOTE: Once pause, fast-forward or rewind is performed with Defi-Link Control Unit II(or Defi-Link Control Unit), the

recorded speed data cannot be played back. To play back the speed data, Play Mode needs to be started

over again. Operation needs to be performed in vehicle's stopped condition. If the PLAY button is pressed

in vehicle's running condition, speed data will not be played back but Play Mode will turn to Rec Mode.

NOTE: The pulse free setting needs to be done again if units are changed.

Set 2 rotary engine at 4 cylinders and 3 rotary engine at 6 cylinders.

NOTE: If the Defi-Link Display VSD CONCEPT is linked with the Defi-Link System, the setting of Defi-

Link Control Unit II(or Defi-Link Control Unit) is prioritized.

NOTE: This function operates when the Defi-Link Display VSD CONCEPT is linked with the Defi-Link

System and the temperature sensor is connected.

NOTE: This function operates when the Defi-Link Display VSD CONCEPT is linked with the Defi-Link

System and the temperature sensor is connected.

Press ENTER button while the vehicle is moving at 60km/h or 40MPH.

NOTE: If the Defi-Link Display VSD CONCEPT is linked with the Defi-Link System, the tachometer

warning2 cannot be set. The setting value of the tachometer warning of Defi-Link Control Unit

II(or Defi-Link Control Unit) is applied as a tachometer warning2. Please set up the tachometer

warning of Defi-Link Control Unit II(or Defi-Link Control Unit) higher than the tachometer

warning1 value. If the value is set lower than the warning1, the warning1 will be invalid.

NOTE: If the Defi-Link Display VSD CONCEPT is linked with the Defi-Link System, the warning buzzer

of Defi-Link Control Unit II cannot be absorbed.

NOTE: This function operates when the Defi-Link Display VSD CONCEPT is linked with the Defi-Link

System.

When the auto dimmer mode is on, the brightness of the display is adjusted automatically. Press

ENTER to Select one from three stages of brightness in the auto dimmer mode during the real mode or

the peak mode. When the manual dimmer mode is on, the brightness of the display can be set

manually at 5 stages in the real mode or the peak mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Defi Link VSD Concept User Manual Page 9

Comments to this Manuals